NuQ Combo NUQ12 The NuQ-12 consists of a front loaded 12″ neodymium LF driver and a 1.4″ neodymium HF compression driver on a rotatable 80°H x 50°V Converging Elliptical Waveguide, matched with an internal passive crossover network in a reflex-loaded enclosure, giving excellent pattern control and allowing a swap of horizontal and vertical coverage patterns. Bi-amp mode can be enabled by means of a rear panel switch. The trapezoidal enclosure is uniquely formed out of pre-bent plywood, which entirely eliminates four cabinet joints and provides additional benefits of superior strength, low weight and reduced internal reflections. The symmetrical shape creates an additional role as mirrored left/right monitor wedges. The cabinet includes a steel mesh grille backed with reticulated foam, and is finished in black or optional white textured paint and includes rigging points for use with optional flying yokes and wall brackets, as well as being compatible with OmniMount loudspeaker brackets. A pole mount socket is fitted for use with 35mm poles and speaker stands. The rear panel connector plate carries two Neutrik speakON NL4 connectors for loop in and loop out connections to additional enclosures. Key Features of NuQ12 2 way full range loudspeaker for portable PA applications 450W continuous, 1,800W peak power Ideal for FOH, side fill and monitor applications 12″ neodymium low frequency driver with low mass voice coil for improved transient response 1.4″ neodymium HF compression driver Rotatable converging elliptical waveguide provides 80° H x 50° V dispersion 5/8″ (15 mm) birch plywood enclosure with hard wearing semi matt black paint finish Powder coated perforated steel with foam backing Integral 35 mm pole mount and handles M10 and M8 rigging points compatible with Turbosound and OmniMount brackets Neutrik speakON NL4 connectors for reliable long life operation NuQ15B The 2,000 Watt NuQ115B is a front loaded 15″ subwoofer system that is ideally suited for a wide range of music and live sound reinforcement applications. Engineered to work in conjunction with Turbosound loudspeaker management systems, the NuQ115B provides optimal FOH performance, as well as exceptional drum and side fill monitoring applications. A bass reflex port design enclosure, the NuQ115B features a high power, double suspension 15″ low frequency driver that utilizes a specialized inside/outside wound voice coil for higher magnetic density, better heat dissipation, high power handling capacity, and improved efficiency. The NuQ115B subwoofer provides fast and accurate transient response for virtually distortion-free operation. Finished in a highly durable semi matt black paint, the cabinet is constructed from 18 mm (¾ “) birch plywood – and includes a rugged powder coated perforated steel mesh grille backed with reticulated foam. A 35 mm pole socket, internal M10 rigging points, and recessed carry handles are standard, as are the high impact interlocking corners, which also ensure ground stacking stability. The rear panel connector plate carries Neutrik speakON * NL4 connectors, with switchable input and link connections to accommodate standalone subwoofer applications, or subwoofer and satellite speaker connectivity via 4 core speaker cabling Key Features of NuQ15B Front loaded subwoofer for portable PA and installation applications 500 Watts continuous, 2,000 Watts peak power Double suspension 15″ low frequency driver with inside/ outside wound coil Low distortion bass reflex port design 18 mm (3/4″) birch plywood enclosure with hard wearing semi matt black paint finish Integral M10 rigging points for ease of installation 35 mm pole mount to support satellite speaker Neutrik speakON NL4 connectors for reliable long life operation
