Description *** Restricted Delivery *** Flammable product restricted to UPS Ground service Extra shipping charges may apply. Amount, Unit 1 Quart Country of Origin USA Description DUX ACRYLIC TOPCOAT for gilding, artwork, hobby & graphic arts use is a non-reactive premium water clear vehicle composed of acrylic copolymers with outstanding characteristics. Its viscosity allows application by brush or spray over gilders leaf requiring protection from abrasion, water, ultra-violet and chemical resistance. It is not intended for use as an architectural coating. Dux Acrylic TopCoatA water-clear non-yellowing topcoat specifically formulated to prevent the lifting of leafwhen top coated, a common problem with many varnishes on the market. Whenproperly applied, this product will prevent tarnishing/oxidation of imitation gold, silverleaf and metallic finishes. This TopCoat has excellent water, ultra-violet and chemicalresistance. It can also be used as a wood finish/sealer and concrete sealer. It isavailable in a gloss or satin finish.Directions for UseSurfaces must be smooth and free of any dust, oils, wax and fingerprints. If the leafrequires cleaning, only alcohol should be used. If applying TopCoat over a previouslyfinished object, the surfaces must be cleaned and lightly sanded, and a small areashould be tested to ensure compatibility. Please contact our technical department forrecommendations.ApplicationThe TopCoat has been formulated to be used at the consistency provided by themanufacturer. If the user feels that thinning is necessary, mineral spirits may be addedin small quantities. TopCoat may be applied by brush, roller or spray. As with any paintor coating, this product should be mixed prior to use. If brushing, any good qualitynatural bristle brush should be used, the self-leveling properties of the size eliminate theneed to over-brush the coating. If rolling, use a high quality short nap roller cover. Whenspraying, follow the equipment manufacturer recommendations. Best results areobtained with a minimum of 2 coats. Allow 3-4 hours of drying between coats MiscellaneousApproximate Coverage: 400-500 square feet per gallonClean up with lacquer thinner.Acrylic TopCoat is primarily designed to prevent the oxidation of metal leaf and toprotect the gilded surface from gentle handling. It should never be applied on leaf thatmay be subjected to heavy use such as: table tops, cabinet doors etc.Top-coating of silver leaf is best done within 4-6 hours of gilding to prevent oxidationfrom occurring. It is best to use the quick-setting size to ensure that its exposure to theatmosphere is kept to a minimum. Care should be given that the edges of the leaf arecompletely sealed.At least two coats of TopCoat are recommended for optimal protection.Ideal application conditions:Temperature: 65-75° Fahrenheit Relative humidity: 40-60% Related
